13
AQT8 Series
User Manual
Link:
The following 2 parameters are displayed as follows:
Status
- Displays the link speed that is plugged in.
Usage
- Displays the amount of data used on that link.
TS Source:
Indicates the port on the unit for the Transport Stream source.
RF Input 1: Indicates the time elapsed since the last time the unit was turned on.
TS 1:
Indicates the IP and port assigned to Transport Stream 1.
M
TS 1:
Indicates the IP and port assigned to MTS.
1
2
3
4
5
Figure 4.2 - “Status” Tab - Detected Issues
4.2 Detected Issues
In the section entitled “Detected Issues”, the following system information is indicated:
If any issues arise, the problem will be shown here and the color will correlate to the urgency of the issue. When there are
no issues, the text will say “No issues detected” and remain black text color. When there is an Error, the text will change to
red
and indicate what is causing the error.
4.4 IP Output Status
In the section entitled “IP Output Status”, the following system information is indicated:
4.3 RF Input Status
In the section entitled “RF Input Status”, the following system information is indicated:
28
Error
Warning
Normal Range
31
Figure 4.3b - SNR Status Range - QAM256
17
Error
Warning
Normal Range
19
Figure 4.3c - SNR Status Range - 8VSB
1
2
3
The Source
column indicates if the RF input is “Dedicated” or
“Common”. See Section 6 for more information.
The RF Channel column displays which RF channel the input is
locked to.
The
SNR column indicates the Signal-to-Noise Ratio (SNR) status
information for each RF Input. See Figure 4.3b (QAM256) and
Figure 4.3c (8VSB) for information on SNR status ranges.
Figure 4.3a - “Status” Tab - RF Input Status
1
2
3
Figure 4.4 - “Status” Tab - IP Output Status
1
2
3
4
5
