30
AQT8 Series
User Manual
Use Custom NTP Servers: Enable ( ) or Disable ( ) the Custom NTP Servers. Network Time Protocol (NTP) uses one
or more IP addresses that the platform can sync time to. When enabled, the three fields under are usable.
Custom NTP Server IP (#1, #2, #3): Enter the custom NTP server IP addresses within these fields. The time servers
specified must support the Network Time Protocol (NTP) in order for automated time acquisition to work properly.
NOTE: Default NTP Servers are “
0.pool.ntp.org
”, “
1.pool.ntp.org
”, “
2.pool.ntp.org
”, and “
3.pool.ntp.org
”.
11.1 “Time” Tab (continued)
6
7
Reverts the configuration back to the previous settings.
Click to apply and save the system configuration changes.
Figure 11.1d - “Save Settings”
9
8
8
9
11.2 “Log” Tab
The “Log” tab (Figure 11.2) allows the user to view the system log messages as well as configure some changeable parameters.
This includes choosing which event message types to display on the screen.
Max Lines to Display: allows the user to select the maximum number of lines to display starting at the most recent.
(Minimum: 1, Maximum: 100,000)
Click this to apply changes to Max Lines to Display setting.
Full Log:
To save the full event log, right-click and choose "Save link as...". The log can then be saved to a user-chosen
location.
Click this to clear the event log.
1
2
3
4
Figure 11.2 - “System Log”
2
1
3
4
7
5
6
REMINDER: Internet access must be present in order to access the default NTP Servers.
7
