21
AQT8 Series
User Manual
6.6 TS Config > Advanced Configuration (continued)
NOTE: PIDs are automatically assigned and use the parameters set through 1 and 2
and when used, through “Global Programs Relative PID Map” (Section 6.8)
The following columns are used to display the PID numbers used for programs within the TS Output.
Input
: Indicates the inputs that the PIDs are being assigned to.
Input PID: Indicates automatically assigned PIDs for each input.
Output PID: Indicates automatically assigned PIDs for each output.
4
5
6
6.7 TS Config > Output Transports
TS #:
Only programs which are being encoded will show
up in this column. A checkbox ( ) can be unchecked
( ) to select one or more Transport Streams to be
removed from the column.
Stream Name: Displays the Source Stream Name.
When the line is expanded, the following read-only data
for each program is shown:
Source:
Displays the RF Port number that this program
is being sourced from as well as the source stream
name.
V:
Displays the Video Encoding and Bandwidth (Mb/S).
A:
Displays the Audio Encoding, Language and
Bandwidth (Mb/S).
Figure 6.7a - “TS Config” Tab - Controls
Within the “Output Transports” (Figure 6.7a and 6.7b) column, the user is able to narrow down the Transport Stream Outputs
viewable under the Transport Configuration column in order to isolate one or more specific streams to configure. This column
is only used to filter and does not affect the configuration in any other way. The controls and parameters are as follows:
The
“Search” function is provided as a way to easily find a program within a list. This standard function is real-time, acting
as a filter to isolate matches as the user types into the input field. Use of “
Clear Search
” will wipe out the typed in words or
numbers.
The “Output Transports” column shows a list of all programs have been added to the TS Output. This column displays the
following information:
The
“Collapse All”
and
“Expand All” buttons are also provided, in
addition to the search function, in order to further filter data.
“
Select All
” and “Deselect All” will either fill in or remove the check
from the boxes. The user can also manually check or uncheck any
boxes they wish to show or hide from the list.
2
1
3
Figure 6.7b - “TS Config” Tab - Output Transports
1
2
3
3
QAM Status: A read-only parameter indicating the QAM output status. This parameter is set under the “RF Output” tab.
