34
AQT8 Series
User Manual
11.5 “Admin” Screen
The “Admin” screen (Figure 11.5) settings allow a user to change or modify the Username and Password values for the unit
while logged in. To access this screen, click the "Admin" link at the top right corner as shown below.
Username:
is the Administrator’s login (16 characters maximum). This login allows the user to make changes to any
area of the unit. (Factory Default: “Admin”)
New Password:
is only used when changing the current Administrator’s password (16 characters maximum). The
password will not be displayed. (Factory Default: “pass”)
Verify New Password:
is required when changing the current Administrator's password. It
MUST match the “Password”
field and will not be displayed.
Click the button to apply changes to the User Configuration.
1
2
3
4
Figure 11.5 - “User Configuration”
1
2
3
4
NOTE: Login and Password are both case-sensitive.
