19
AQT8 Series
User Manual
6.4 TS Select > Search Function and Additional Controls
As pointed out in the prior sections, the search field and
additional controls are provided for easier management and
setup of the programs. (See Figure 6.4)
The
“Search” function is provided as a way to easily find a
program within a list. This standard function is real-time, acting
as a filter to isolate matches as the user types into the input field.
The
“Collapse All”
and
“Expand All” buttons are also provided,
in addition to the search function, in order to further filter data.
As shown in Figure 6.4, when a search is performed, the filtered lines with the matching search terms will highlight as
bold
italic red-colored
text, while the rest of the programs will be hidden until the search input is cleared out or a new search is
performed.
The “Transport Configuration” column allows the user to set up and assign parameters within each TS Output. The transport
streams can be set up in either “Basic Configuration” or “Advanced Configuration”
.
In
Basic Configuration
(Figure 6.5), the following parameters can be set:
TS Bitrate:
The user can use the drop down list to set the bitrate or choose custom bitrate and input the desired bitrate.
When the Transport Stream has been assigned to a QAM Output, the TS is QAM Locked.
6.3 TS Select > Removing Programs from the Transport Stream Output (continued)
Removing Program(s):
Click
“Remove” and the program will be made available once again within the “RF Input TS”
column and removed from the “Cherry Picked Transports” column. In addition, the user is able to click the “Remove
All
” button and clear out all programs from all Transport Stream Outputs. This is useful for starting over completely.
Figure 6.5 - “Cherry Picking” > “TS Config” Tab - Full View (Basic Configuration)
1
4
2
5
7
3
6
8
6.5 TS Config > Basic Configuration
The “TS
(Transport Stream)
Config” tab (Figure 6.5) is a read and write screen which allows a user to assign TS parameters.
3
1
2
NOTE: When the Transport Stream is set as QAM Locked, it cannot be changed and is set to a 38.81 Mb/S bitrate.
TSID: The user must enter the identification number for the output TS. The range is 0 to 65535. The TS ID assigned must
be unique. Duplicates are not allowed.
Figure 6.4 - Search and Additional Controls
