Black Box MT1000A-13-R3, Quick Start Manual

Page: 25 / 78

Front Panel Indicators and Switches 3-1
Chapter 3
Operation
3.1 General
In this chapter you will find detailed instructions for operating the MT1000A.
The information presented in this chapter includes a description of the
MT1000A front panel controls, and operating procedures (turning on, front-panel
indications, and turning off).
3.2 Turning MT1000A On
To turn on an MT1000A unit with a single power supply:
1. Connect the power cable to the power connector on the rear panel of the
MT1000A.
2. Connect the power cable to the electricity outlet.
The PWR A indicator lights in green.
To turn on an MT1000A unit with two power supply units:
1. Connect each power cable to a power connector on the rear panel of the
MT1000A.
2. Connect each power cable to the electricity outlet.
The corresponding PWR indicator(s) light in green.
3.3 Front Panel Indicators and Switches
Figure 3-1 shows the front panel of the MT1000A. Table 3-1 lists the functions of
the MT1000A controls, connectors and indicators located on the
MT1000A front panel. The index numbers in
Table 3-1 correspond to the item
numbers in Figure 3-1 .