Black Box MT1000A-13-R3, Quick Start Manual

Page: 35 / 78

MT1000A Installation and Operation Manual Chapter 4 Configuration
Monitoring the Physical Ports 4-7
Monitoring the Status of the Remote System
To monitor the status of the remote system:
• From the System menu, choose Remote System Status .
The Remote System Status screen ( Figure 4-7 ) is displayed. The fields in this
screen have the same meaning as those in the Local System Status screen,
described in
Table 4-1 .
MT1000A
Remote System Status
Device Type > (MT1000A)
Service Channel > (Not Exists)
Active Link > (LINK_A)
Force Link > (LINK_A)
Redundancy status > (Available)
Redundancy Mode > (AUTO)
SW Version (1.00)
HW Version (0.00)
PS1 Type > (AC)
PS1 Status > (OK)
PS2 Type > (AC)
PS2 Status > (Fault)
Alarm Indication > (Major)
Test Indication > (Off)
>
Please select item <1 to 0>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-7. Remote System Status Screen
4.4 Monitoring the Physical Ports
You can monitor the following aspects of the physical ports on the MT1000A:
•
Management port status
•
Up-link status
•
Channel status.
To monitor the physical ports:
1. From the Monitoring menu ( Figure 4-4 ), choose Physical Port Monitoring .
The Physical Port Monitoring menu ( Figure 4-8 ) is displayed.