Black Box MT1000A-13-R3, Quick Start Manual

Page: 47 / 78

MT1000A Installation and Operation Manual Chapter 4 Configuration
Configuring the MT1000A 4-19
2. Choose the method to use for management access:
SNMP (the management terminal connects to the MT1000A via SNMP
connection)
Telnet (the management terminal connects to the MT1000A via Telnet
connection)
Web (the management terminal connects to the MT1000A via Web
connection)
The menu shown in the following figure is displayed. The title of the menu
indicates which management access option is being configured. While the
Telnet menu is shown in the figure, the menu options are the same for all
management access modes.
MT1000A
Telnet
1. Disable
2. Enable
3. Managers only
>
Please select item <1 to 3>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-29. Telnet Menu
3. Choose Enable to enable this access mode; choose Disable to disable this
access mode. Choose Managers only to provide management access only to
those users whose IP addresses appear in the Manager List.
4. When the Web management access method is selected, set the Web Trace
Refresh (1-155 seconds) in the Manger Access menu. This option is available
only when Web access is enabled.
Setting the User Name and Password
To enhance security, you can specify a user name and password to control access
to the MT1000A management functions.
To set user name and password:
1. From the System Configuration menu ( Figure 4-19 ), choose Control Port .
The Control Port menu ( Figure 4-30 ) is displayed.
MT1000A
Control Port
1. Change Access >
2. Baud Rate > (19200bps)
3. Security Timeout (10min)
4. POP Alarms > (OFF)
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-30. Control Port Menu