Black Box MT1000A-13-R3, Quick Start Manual, Page: 48 / 78

Chapter 4 Configuration MT1000A Installation and Operation Manual
4-20 Configuring the MT1000A
2. Choose Change Access .
The Change Access menu ( Figure 4-31 ) is displayed.
MT1000A
Change Access
1. Change User Name ... (user)
2. Change Password ... ()
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-31. Change Access Menu
3. To change the user name, choose Change User Name and then enter the new
user name.
4. To change the password, choose Change Password and then enter the new
password. The new password may contain up to eight characters.
Configuring the Control Port
The control port is used to connect a console terminal to the MT1000A device.
To configure the control port:
1. From the Control Port menu ( Figure 4-30 ), choose Baud Rate .
The Baud Rate menu ( Figure 4-32 ) is displayed.
MT1000A
Baud Rate (9600bps)
1. 9600 bps
2. 19200 bps
3. 38400 bps
4. 57600 bps
5. 115200 bps
>
Please select item <1 to 5>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-32. Baud Rate Menu
2. Choose the baud rate that matches your management terminal device.
3. From the Control Port menu, choose
Security Timeout , and then enter a
timeout value in minutes. This value is the number of minutes of management
inactivity after which the MT1000A automatically disconnects from the
management session. To reconnect, press
<Enter> on the management
terminal and then log in again.
4. Choose POP Alarms to toggle POP Alarms ON or OFF. When POP Alarms is
ON, new alarms appear at the bottom of the terminal screen. Regardless of the
POP Alarms setting, the alarms are written to the log file.