Black Box MT1000A-13-R3, Quick Start Manual

Page: 53 / 78

MT1000A Installation and Operation Manual Chapter 4 Configuration
Diagnostics 4-25
2. Choose Local Device Loops .
The Local Device Loops Menu ( Figure 4-40 ) is displayed.
MT1000A
Local Device Loops
1. Loops Setting [] >
2. Uplink LLB timeout (min) ... (5)
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-40. Local Device Loops Menu
3. Choose Uplink LLB Timeout and then enter the timeout in minutes. The value
you specify is the duration of the E2 LLB loopback test. Specify a value as
follows:
0 (forever)
1-255 (test runs for the specified number of minutes).
To set the E1 LLB local loopback timeout on the remote MT1000A:
1. From the Diagnostics menu ( Figure 4-39 ), choose Remote Device Loops .
The Remote Device Loops menu is displayed. This menu is the same as the
Local Device Loops menu (
Figure 4-40 ). Set the loopback as described
above for the setting the timeout on the local MT1000A.
Setting Loopbacks in the Local MT1000A
To set loopbacks in the local MT1000A:
1. From the Local Device Loops menu ( Figure 4-40 ), choose Loops Setting .
The Loops Setting screen ( Figure 4-41 ) is displayed.
MT1000A
Loops Setting
Port Loop status
Uplink LLB
Channel 1 No loop
Channel 2 No loop
Channel 3 No loop
Channel 4 No loop
1. No loop
2. LLB
3. RLB
>
Please select item <1 to 3>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-41. Loops Setting Screen