Black Box MT1000A-13-R3, Quick Start Manual

Page: 14 / 78

Chapter 1 Introduction MT1000A Installation and Operation Manual
1-8 Technical Specifications
CONTROL DTE
Supervisory Port
(Optional)
Interface V.24/RS-232, asynchronous DTE interface
Connector 9-pin D-type female connector
Data Rate
9.6, 19.2, 38.4, 57.6 and 115.2 kbps
MNG-ETH
Physical Interface 10BaseT
Data Rate 10 Mbps
Transmission Mode Full/Half-duplex
Connector Shielded RJ-45
Cable Type UTP-CAT5
ALARM
Connector
Connector 9-pin D-type female connector
Contact Functions Set of floating normally-closed/normally-open contacts for
major and minor alarm indication
Contact Rating Maximum 1A (at 30 VDC or 30 VAC) through closed
contacts
Physical
Characteristics
Height 44 mm / 1.75 in (1U)
Width 440 mm / 17.4 in
Depth 240 mm / 9.5 in
Weight 2 kg / 4.4 lb
Power
Requirements
AC/DC Powered
Units 100 to 240 VAC, 50 or 60 Hz, 13.5 VA
-or-
40–72 VDC, 9.5 W
DC Powered Units 24 VDC, 7.5 W
Note: MT1000A can support up to two (redundant) power supplies.