Black Box MT1000A-13-R3, Quick Start Manual

Page: 44 / 78

Chapter 4 Configuration MT1000A Installation and Operation Manual
4-16 Configuring the MT1000A
Setting the Device Information
Each MT1000A unit can be configured to hold information about the unit, such as
its location and a name to easily identify the unit on the network.
To set device information:
1. From the System Configuration menu ( Figure 4-19 ), choose Management .
The Management menu ( Figure 4-23 ) is displayed.
MT1000A
Management
1. Device Info >
2. Host IP >
3. Manager List []>
4. Manager Access >
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-23. Management Menu
2. Choose Device Info .
The Device Info menu ( Figure 4-24 ) is displayed.
MT1000A
Device Info
System Description ... (MT1000A Hw Version 0.0 SW Version 30)
1. System Contact ... ()
2. System Name ... ()
3. System Location ... ()
>
Please select item <1 to 3>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-24. Device Info Menu
The System Description line identifies the device, along with the current
hardware and software version numbers.
3. To define a system contact person, choose System Contact and then enter the
name, phone and/or other details you want to save in this field.
4. To specify a name to identify the MT1000A device, choose System Name and
then enter the name. It is easier to identify the device by a name than by its IP
address.
5. To specify a system location, choose System Location and then enter the
location of the MT1000A unit.