Black Box MT1000A-13-R3, Quick Start Manual

Page: 51 / 78

MT1000A Installation and Operation Manual Chapter 4 Configuration
Configuring the Physical Ports 4-23
Full (Full-duplex mode)
Half (Half-duplex mode).
5. Choose Ethernet alarm mask to toggle the Ethernet alarm on or off.
Configuring the Channels
To configure the channels:
1. From the Local/Remote Physical Ports Configuration menu (
Figure 4-35
),
choose Channels Configuration .
The Channels Configuration screen ( Figure 4-37 ) is displayed.
MT1000A
Channels Configuration
1. Channel name ... ( )
2. Channel alarm mask (Off)
3. Channel line code (B8ZS)
4. Channel line length (0-133 ft)
5. Channel Number (1)
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-37. Channels Configuration Screen
2. Choose Channel Number and then enter the number of the channel you want
to configure.
3. If you would like to specify a name to help identify the channel, choose
Channel name and then enter the name (a text string).
4. Choose Channel alarm mask to toggle the alarm for this channel on or off.
5. Choose Channel line code to toggle the line code. Note that changing the line
coding for one channel changes it for all four channels. The following line
codes are available:
B8ZS
AMI
6. To change the channel line length value, choose Channel line length and then
choose the desired value.
Configuring the Up-Links
To configure the up-links:
1. From the Local/Remote Physical Ports Configuration menu ( Figure 4-35 ),
choose Up-Link Configuration .
The Up-Link Configuration screen ( Figure 4-38 ) is displayed.