64
:SOURce:PRATe <point rate>
This command is not used. Point rate setting is available for arbitrary mode only. Please see section 4.13.4.1 for
details.
4.13.1.7 AM modulation
The following sections control the AM modulation:
4.13.1.7.1 AM STATe
This command activates or deactivates AM modulation:
Arguments
Type:
Boolean
Command Type: Setting or Query
Setting
Syntax:
[: SOURce:]AM [:STATe]<ws>ON|1|OFF|0
Examples:
: SOURce:AM :STAT ON
AM OFF
Query
Syntax:
[:SOURce:]AM[:STATe]?
Response:
0|1
4.13.1.7.2 AM DEPTh
This command sets the AM modulation depth in %
Arguments
Type:
Numeric
Units:
none (implied %)
Range:
0 to 100
Rounding:
to integer
Command Type: Setting or Query
Setting
Syntax:
:SOURce:AM:DEPTh<ws><percent depth>
:SOURce:AM:DEPTh<ws>MINimum|MAXimum
Examples:
AM:DEPTh 50
Query
Syntax:
AM:DEPTh?[<ws>MINimum|MAXimum]
Response:
NR3
4.13.1.7.3 AM SHAPe
This command selects the AM modulating waveform shape
Arguments
Type:
Character
Options:
SINusoid, TRIangle, SQUare
Command Type: Setting or Query
Setting
Syntax:
[:SOURce:]AM:SHAPe<ws><SIN|TRI|SQU>
Examples:
[:SOURce:]AM:SHPE SIN
AM:SHAPE TRI
Query
Syntax:
[:SOURce:]AM:SHAPe?
Response:
SIN|TRI|SQU
