33
FSK
Menu
F1: ON/OFF
- Selects the FSK ON or OFF operating mode.
F2: F-HI
-
Defines the High frequency of the FSK.
F3: F-LO
-
Defines the Low frequency of the FSK.
F4: RATE
-
Selects the rate of alternation between the low and high frequencies.
F5: EXT/INT
-
Selects and enables the external FSK when the unit frequency is alternating between
the low and high frequencies by an external signal applied to the Trig In connector.
3.6.9 SETUPS Key
The waveform generator can store the current front-panel settings, called a setup, into one of 50 storage buffers.
When you recall a setup, the waveform generator restores the front-panel settings to those that you stored in the
selected buffer. All waveform data, except for the waveform memory data, is stored in the setup.
SETUP Menu
F1: RECALL
- Recalls a previously stored front-panel setup from the selected buffer. Change the buffer
number by using the rotary input knob. Valid storage buffer numbers are from 0 to 49.
Buffer 0 is the factory default setup.
F3: STORE
-
Stores the current front-panel setup to the specified storage buffer. Change the buffer number
by using the numeric keypad or the rotary input knob. Valid storage buffer numbers range from
1 to 49. Below is a list of parameters that can be stored in each buffer.
Note: Location 50 is for last working setup before power down.
