56
For Model 4079
500
Trigger rate short on channel 1
501
Trigger rate short on channel 2
510
Output overload on channel 1
511
Output overload on channel 2
"Trigger rate short" means that the period of the waveform is larger than the value of the internal trigger rate. Thus
not every trigger will generate a cycle (or burst) of the waveform.
4.12 Common Commands
The following section describes the common commands according to the IEEE 488.2 specifications. These
commands are applicable for
both
GPIB and RS-232 interface.
4.12.1 System Data Commands
a)
*IDN?
- Identification query
The identification query enables unique identification of the device over the GPIB. This query should
always be the last in a program message. It returns a string with four fields:
Manufacturer name
Model name
Serial number (0 if not relevant)
Version number
Command
Type:
Common Query
Syntax: *IDN?
Response: B&K, MODEL 4076,0,V1.40
b)
*OPT?
- Option identification query
The Option Identification Query is used to identify device options over the system interface. This query
should always be the last in a program message.
Command
Type:
Common Query
Syntax: *OPT?
Response : No option available.
4.12.2 Internal Operation Commands
a)
*RST
- Reset command
The Reset command performs a device reset. It causes the device to return to the factory default power up
state.