![background image](http://html.mh-extra.com/html/harman/amx-n-series/amx-n-series_quick-start-manual_3990730001.webp)
QUICK START GUIDE
NMX-WP-N2510
N-Series Windowing Processor, 4x1
© 2017 Harman. All rights reserved. Modero, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of
HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
Last Revised: 05/2017
800-2510
REV: B
Specifications
Troubleshooting
Use the following guidelines when troubleshooting your setup.
The N2510 is routed to a Decoder, but the Decoder is showing local play content.
• Is
Stream Output
enabled on the N2510?
• Does the N2510 have a Control IP address?
• Did you verify that no other devices have the same
Output Stream
number as the N2510?
• Is the Decoder properly assigned to the output of the N2510?
• Is the network configured appropriately for N2000 video traffic?
The N2510 is routed to a Decoder, but the Decoder only shows four AMX logos.
• Are the source Encoders enabled?
• Are the video sources properly routed to windows of the N2510?
• Is the network configured appropriately for N2000 video traffic?
You cannot access the unit properties after discovery.
Verify that the host PC has an IP address in the same range as the N2510.Double-click the name of the unit to
access its properties or use a web browser and access the unit via its IP address.
The web page is not loading or displaying correctly.
Retry using Firefox or Chrome (some older versions of Internet Explorer are not supported).
Contact technical support at [email protected] or 256.461.7143 x9900 for any installation issues.
PRODUCT SPECIFICATIONS
Power
Requirements:
Internal power supply:
1.0 Amp @ 120 Volts DC; 100-240 Volts
AC power supply
Dimensions
(HWD):
1.75” x 17.25” x 12” (4.5cm x 43.8cm x 30.5cm)
Weight:
7.15 lbs (3.24kg)
Certifications:
FCC, CE, and NRTL
?? UL??
Environmental:
Temperature:
32° to 104°F (0° to 40°C)
Humidity:
10% to 90% RH (non-condensing)
Overview
The NMX-WP-N2510 4x1 Windowing Processor accepts up to four real-time HD streams and then allows you to combine and customize
them into a single output stream. This1RU rackmount appliance connects to the video over IP network and accepts video streams (from
N2000 Series Encoders) via a single network port. Each input can be cropped, scaled, and positioned according to stored presets (such as
quad, window-in-window, 3+1, etc.) or in any user-defined configuration. The combined output video stream can then be routed as a
single, compressed stream to one or more displays via the same network port.
NOTE: For proper operation, all four U ports must be connected to active streams.
Connect N2000 streams to any of the
P0-P2
ports. To achieve larger stacked configurations, additional Windowing Processors can be used
as input streams (using any
P0-P2
port).
N2510 Windowing Processor Front View
N2510 Windowing Processor Rear View