29
Copy
Function.
Copies an area of waveform memory to another area of waveform memory.
F1: FROM
- Selects the address of the first point to copy.
F2: LENG
- Selects the length (number of points) of the waveform to copy.
F3: TO
- Selects the destination address where the first point is copied.
F4: EXEC
- Prompts you to confirm whether to copy. Press NO to abort copying, YES to copy.
F5: PREV
- Returns to previous menu.
Clear
Function.
Clears (sets the data values to zero) either a section of or all of waveform memory.
F1:
FROM
-
Selects the address of the first point to clear.
F2: TO
- Selects the address of the last point to clear.
F3: ALL
- Clears the whole waveform memory. Equivalent to selecting from 1 to 400,000.
F4: EXEC
- Prompts you to confirm whether to clear. Press NO to abort clearing, YES to clear.
F5: PREV
- Returns to previous menu.
Protect
Function.
Protects (makes read-only) a section of waveform memory.
F1: FROM
-
Selects the address of the first point to protect.
F2: TO
- Selects the address of the last point to protect.
F3: ALL
- Protects the whole waveform memory. Equivalent to selecting from 1 to 400,000.
Note:
You can protect only one segment of waveform memory at a time.
F4: ON/OFF
- Selects the unprotect mode and resets memory protection so that the whole waveform
memory can be written into.
F5: PREV
- Returns to previous menu.
3.6.5 PULSE Menu
From the
WAVE
menu, select
F4:PULSE
.
F1: FREQ/PERIOD -
Selects the parameter definition of the Pulse repetition period.
F2: WIDTH
- Selects the Width of the generated pulse.
F3: EQUAL EDGE
- Selects equal Rise (Leading edge) and Fall (Trailing edge) times of the pulse.
