58
Type:
Common Command
Syntax: *CLS
b)
*ESE
- Standard event status enable
This command is used to set the value of the Standard Event Status Enable Register.
Arguments
Type: NRf
Range: 0 to 255. Non integer arguments are rounded before execution.
Type:
Common Command or Query
Syntax: *ESE<ws><NRf>
Examples: *ESE 48 (Enables the CME and EXE bits)
*ESE 255 (Enables all standard events)
Query
Syntax: *ESE?
Response: <NR1>
c)
*ESR?
- Standard event status register query
This query is used to read the value of the Standard Event Status Register. Reading the register clears it.
Type:
Common Query
Syntax: *ESR?
Response: <NR1>
d)
*PSC
- Power on status clear command
This command is used to control the automatic power-on clearing of certain status functions.
Arguments
Type: Boolean
Type:
Common Command or Query
Command
Syntax: *PSC<ws><Boolean>
Examples: *PSC ON or *PSC 1
*PSC OFF or *PSC 0
Query
Syntax: *PSC?
Response: ASCII 0 for OFF
ASCII 1 for ON
When set to ON (1), the Service Request Enable Register and the Standard Event Status Enable Register
are cleared on power-on.
e)
*SRE
- Service request enable command
This command sets the Service Request Enable Register bits.
Arguments
Type: NRf
Range: 0 to 255. Non integer arguments are rounded before execution.
The value of bit 6 is ignored, and is set always to zero.