82
Command Type: Setting or Query
Setting
Syntax:
:ARBitrary:LENGth<ws><length>
:ARBitrary:LENGth<ws>MINimum|MAXimum
Example:
:ARB:LENG 1E3
Query
Syntax:
:ARBitrary:LENGth?[<ws>MINimum|MAXimum]
Example:
:ARB:LENG?
Response: NR1
Considerations: 1) Changing the wavelength will change either the frequency.
2) The minimum wavelength is 2.
4.13.4.12 Marker Address
:ARBitrary:MARKer [:ADDRess] <marker address>
This command is used to set the address of the marker.
Arguments
Type:
Numeric.
Range:
1 to 4,000,000
Rounding:
to integer values
Setting
Syntax:
:ARBitrary:MARKer[:ADDRess]<ws><marker address>
Examples:
:ARB:MARK 45
Query
Syntax:
:ARBitrary:MARKer[:ADDRess]?
Example:
:ARB:MARK?
Response:
Marker address in NR1 format.
Considerations: The marker is only output if its address is within the range of addresses currently being run.
4.13.4.13 Marker Length
:ARBitrary:MARKer:LENGth <numeric value>
This command is used to set the marker length. The maximum allowed length of marker is 4000. The marker
length is specified by appending a numeric value, to the MARKer keyword. Maximum MARKER Length 4000
points
Arguments
Type:
Numeric
Command Type: Setting or Query
Setting
Syntax:
:ARBitrary:MARKer:LENGth<ws><length>
Example:
:ARB:MARK:LENG 5
Query
Syntax:
:ARBitrary:MARKer:LENGth?
Response:
NR1
4.13.4.14 Marker State
:ARBitrary:MARKer:STATe <Boolean>
This command is used to enable or disable the marker.