BT-770 Operation manual
37
P/N : 770-ENG-OPM-EUR-D03
Bistos Co., Ltd.
2018.05
3.6 Freezing waves
In the patient monitoring process, you can freeze the wave on the screen, review and carefully
observe the patient's condition during this time. Freeze / unfreeze the wave as follows:
Select
【
Freeze
】
hotkey or press the [Freeze] key on the monitor panel to freeze the
displayed wave of the monitor.
Select
【
Freeze
】
hotkey or press the [Freeze] key on the monitor panel again to release
the freezing state.
3.7 Other common setup
The common setup of the monitor is the general setup that defines how the monitor works, for
example: alarm volume setting. They may affect the setup of multiple measurements or display
interfaces.
3.7.1 Defining the monitor
When install the monitor or change the usage occasion, the monitor should be defined as
follows:
Select
[Settings]Smart Hotkey or press [Setting] key on the monitor panel
→
“
Settings
”
.
Select “User Maintenance >>” →enter the password and confirm → “User Maintenance”
menu.
Select “Device Name”: Enter device name through the soft keyboard on the screen.
Select “Department”: Enter the sector and department using the device through the
soft keyboard on the screen.
Select “Bed Number”: Enter the bed number through the soft keyboard on the
screen.
