BT-770 Operation manual
33
P/N : 770-ENG-OPM-EUR-D03
Bistos Co., Ltd.
2018.05
3.1.4 Start monitoring
Start monitoring in the following steps:
-
Check if the patient cable and the sensor are connected properly.
-
Check if the settings of the monitor are corrects, such as patient type.
-
For the details of parameter measurement or monitoring, see the appropriate
section.
-
The operator can operate according to their own habits, standing in front, left or
right of the monitor, easy to observe and operate the monitor.
3.2 Turn off
Turn off the monitor in the following steps
-
Disconnect the cables and sensors connected to the patient.
-
Press and hold the [Power] key for 2 seconds to pop up the 3 seconds countdown
window, and the monitor turns off in 3 seconds.
CAUTION
•
If the monitor is not turned off properly, you can simply disconnect the power
to shutdown forcibly. But the forced shutdown may cause data loss, and it is
not recommended.
3.3 Basic operations
3.3.1
Using the control knob
Control knob can be used to perform the following operations:
-
Rotate: Rotate control knob clockwise or counter clockwise to move the cursor.
-
Press: Press control knob to perform an action, such as access to a menu or execute a
command.
Control knob is the main control means. On the interface or the menu, the green highlighted
box that moves with the knob turning is called the cursor. By turning the control knob, you can
position the cursor in order to perform the desired operation.
