Bioneer Exicycler 384, User Manual

Page: 34 / 78

29
www.bioneer.com
BQ-042-101-12
Revision : 0 (2018-07-05
Exicycler
™
384
7) When copying calibration folder is complete, click OK to
finish the process. Please confirm the connection between
device and computer, and restart Exicycler384 software.
2. The computer does not register
Exicycler
™ 384 when launching ‘Run Exicycler384’ software.
This message means that the device is not turned on or the
appropriate device driver has not yet been installed on the
computer. If you see this message despite the instrument is
turned on, then you should re-install the device driver to solve
this problem. The driver installation steps are described in
‘Installing Exicycler384 Software’ section.
3. An Error message is displayed when lunching ‘Run Exicycler384’ software.
This message indicates that ‘.NET Framework 1.1’ has not yet
been installed. Go to ‘Installing.NET Framework 1.1 Package’
section and re-install as described.