Bioneer Exicycler 384, User Manual

Page: 10 / 78

5
www.bioneer.com
BQ-042-101-12
Revision : 0 (2018-07-05
Exicycler
™
384
Symbols on
Exicycler™ 384
Safety Symbols on Exicycler ™ 384
The following table describes the safety symbols that may be displayed on
Exicycler ™ 384. Each symbol may
appear by itself or with text that explains the relevant hazard.
Hot surface.
Note that the surface is hot.
Do not work the bath at low temperature for long hours.
This can cause condensation and lead to equipment malfunction.
Be aware of the door.
Please pay attention to the door when it is moving.
CRUSH HAZARD
Stay clear of this area when the door is in operation.
Unawareness can cause injury.
Electrical Symbols on
Exicycler
™ 384
The following table describes the electrical symbols that may be displayed on
Exicycler
™ 384.
Indicates On position of the main power switch.
Indicates Off position of the main power switch.
Indicates a standby switch by which the instrument is switched on to the
Standby condition.
Indicates a protective grounding terminal in the instruments that must be
connected to earth ground.
Indicates a terminal that can receive or supply alternating current or voltage.
Indicates a terminal that can receive or supply direct current or voltage.
Environmental Symbols on
Exicycler
™ 384
The following symbol (WEEE) applies to
Exicycler
™ 384 placed on the European market.
Do not dispose of
Exicycler
™ 384 as unsorted municipal waste.
Follow local municipal waste ordinances for proper disposal provisions to
reduce environmental impact of waste from electrical and electronic
instrument.
European Union customers:
Call your local European office for Bioneer instruments pick-up and
recycling.