AllInOneCycler
TM
/
Thermal Block
34
www.bioneer.com
BQ-042-101-01
Revision : 0(2012-12-07)
2)
Open protocols saved in USB drive
The user can open or run protocols saved in USB drive.
a)
Insert USB drive to the USB ports in front or rear (lower) of
All
I
nOneCycler
TM
(See
figure 2 and 3 at p. 13).
b)
A few seconds later, ‘From USB’ icon will be activated.
Figure 23. Open the protocols saved in USB drive
c)
Press ‘From USB’ icon, and the list of saved protocols in USB will be displayed in the
left side of the screen. The USB folders displayed as ‘USB – folder name’ will be
listed at the top of ‘Folders’ window, and the folders of
All
I
nOneCycler
TM
will be below
the USB folder list.
d)
The user can select protocols in ‘Protocol Files’ window and confirm the detailed
procedure of the selected protocols in the right side of the screen.
