AllInOneCycler
TM
/
Thermal Block
7
www.bioneer.com
BQ-042-101-01
Revision : 0(2012-12-07)
4.
Precautions and warnings regarding instrument installation
(1)
This is a precision instrument. Do not install in a location exposed to direct sunlight.
(2)
Install the instrument on a flat, solid surface that is flat and does not move.
(3)
When installing the instrument, make sure at least 15 cm separate the instrument from the
nearest wall.
(4)
When connecting the PC, network hub and
All
I
nOneCycler
TM
, do so with all involved
components powered off. Connecting components while the power is on may cause
damage to the instrument.
(5)
Verify the network cable integrity when connecting between the PC, network hub and
All
I
nOneCycler
TM
. Unstable network connections may result in invalid experimental data from
data communication errors.
5.
Precautions and warnings regarding instrument operation
(1)
Dust off the power plug and insert the plug so that the connection is firm and does not
wiggle. Incomplete electrical contacts may cause fire.
(2)
Operate the instrument in an ambient temperature range of 15℃~30℃(59~86℉). Excessive
exposure to heat may affect the instrument and yield inexact results.
(3)
Operate the instrument within the recommended humidity range (20~80%, no condensation).
Humid conditions may cause corrosion or malfunction.
(4)
Do not place any objects next to or behind the instrument. The instrument may malfunction.
(5)
This instrument contains precision machined parts. Do not drop or severely agitate the
instrument. This can break the instrument and compromise the safety of the product.
(6)
When not using the instrument for a long period of time, turn the instrument off and unplug
from the wall outlet. Overheating and fire may occur.
(7)
Set your PC's Power Options for 'Turn off the display', 'Turn off the hard disk', 'Standby
mode' and 'Sleep mode' to 'Never'. Because the instrument continuously transmits and
receives data from the PC, hard disk power-down may cause malfunctions.
(8)
Do NOT open the door during instrument’s operation as this may result in the instrument to
malfunction, causing bodily harm, including burns to hands or body.
(9)
Moving parts can crush and cut. Keep hands clear of moving parts while operating the
instrument.
6.
Precautions and warnings regarding product usage and maintenance
