bioMerieux TEMPO User Manual Download

Page: 246 / 258

Appendix

Appendix 3: Main computer system messages and annotations

12-12

TEMPO

Reading Station

User’s Manual

an incorrect extraction configuration was provided.

reader is not connected.

unknown host name.

unable to connect.

unable to disconnect.

bad version for communication protocol.

unexpected exception due to connection refusal.

reader is currently used by another station.

reader is currently working.

reader is currently ready.

bad position value returned by reader.

bad values found in card positions.

error while reading reader response.

command failed.

bad format for data found between brackets.

REunable to accept connections.

bad format for date.

infinite loop detected while reading rack.

Summary of Contents for TEMPO



































































































































































































































































Search results

Summary of Contents for TEMPO

Reviews:

Related manuals for TEMPO

Brands by name

Popular brands

bioMerieux TEMPO, User Manual

Search results

Summary of Contents for TEMPO

Reviews:

Related manuals for TEMPO

Brands by name

Popular brands