September 2021
Installation, Operation and Maintenance Manual
VCIOM-01249-EN Rev. 0
67
Set-Up Routines
Section 9: Set-Up Routines
Closing direction
•
Press YES if the status is OK, or NO to change. Press YES to confirm (status = On,
enables 2-speed timer operation in closing direction status = Off, disables timer
operation in closing direction).
•
Press YES if the position value where pulsing control starts is correct, press NO to
scroll the list of available values. Press YES when the value is correct.
•
Press YES if the position value where pulsing control stops is correct, press NO to
scroll the list of available values. Press YES when the value is correct.
•
Press YES if the value of the ON time of pulsing control is correct, press NO to scroll
the list of available values. Press YES when the value is correct.
•
Press YES if the value of the OFF time of pulsing control is correct, press NO to
scroll the list of available values. Press YES when the value is correct.
Opening direction
•
Press YES if the status is OK, or NO to change. Press YES to confirm (status = On
enables 2-speed timer operation in opening direction status = Off, disables timer
operation in opening direction).
•
Press YES if the position value where pulsing control starts is correct, press NO to
scroll the list of available values. Press YES when the value is correct.
•
Press YES if the position value where pulsing control stops is correct, press NO to
scroll the list of available values. Press YES when the value is correct.
•
Press YES if the value of the ON time of pulsing control is correct, press NO to scroll
the list of available values. Press YES when the value is correct.
•
Press YES if the value of the OFF time of pulsing control is correct, press NO to
scroll the list of available values. Press YES when the value is correct.
Figure 49
Motor
Start
position %
Stop
position %
On time
On time
On time
Off
time
Off
time
Off
time
