BERTHOLD TECHNOLOGIES LB4710-050, User Manual

Page: 165 / 227

Chapter 3 Parameters
Mini-Switch LB 471
20
Code
no.
Designation Value range Factory
setting
Page
40 Interference radiation
detection 0 - 1 0 38
41 Waiting time after inter-
ference radiation 0 - 999 20 39
42 Signaling interference
radiation 0 - 2 0 39
43 Signaling unlocked 0 - 2 0 39
44 Signaling minor errors 0 - 2 1 40
45 Signaling excess temp.
detector (only FSK
detector) 0 - 2 0 40
46 Temperature threshold
detector (only FSK) 0 - 99 40 40
47 Signaling excess temp.
EVU 0 - 2 0 41
48 Temperature threshold
EVU 0 - 99 85 41
50 Limit switch software 1.00 - 9.99 Version 41
51 Detector software
(only FSK) 1.00 - 9.99 Reading 41
52 Detector temperature °C
(only FSK detector) -40 - 80 Reading 41
53 Detector high voltage
(only FSK) 500 - 1300 -1 42
54 detector HV start value
(only FSK) 500 - 1300 HV default 42
55 Source replacement 00.00 - 99.12 -1 42
56 Evaluation unit electronics
temperature -100 - 200 Reading 43
60 Test pulse generator 0 - 999.9 0 43
61 Test error relay 0 - 2 0 44
62 Test alarm relay 0 - 2 0 44
63 Test warning relay 0 - 2 0 44
64 Test display 44
65 Test keyboard 44
66 Status digital in 00.00 - 01.01 Reading 45
67 HV max for plateau
measurement 500 - 1300 1000 45
68 Detector plateau meas-
urement
(only FSK) 0 - 5 0 45
70 Error log 0 - 1 0 47
71 Revision log 0 - 1 0 48
72 Save & Load / Reset 0 - 99 0 49
Code numbers that are not listed in this table are not used or empty
and are skipped on the display.
The same table is shown on page 76 with an empty column. In this
column you may enter your data after start-up.
Table 3:
Code table for
professional mode