BERTHOLD TECHNOLOGIES LB4710-050, User Manual

Page: 154 / 227

Chapter 2 Operation
Mini-Switch LB 471
9
Chapter 2. Operation
2.1
Basics of Operation
2.1.1 Buttons
Enter

Enable edit mode
(In windows that cannot be edited, this button is disabled.)

Exit edit mode; the displayed value is accepted or saved.

Confirm error.
/
Left/Right

Select the digit you want to edit.
Up
Down

Shows the next or previous code if no digit is flashing. Keep
this button pushed down (2s) to accelerate this process.

Increments or decrements the value of the flashing digit.
Keep this button pushed down (2s) to accelerate this process.
Clear

Set values to 0 (only in edit mode).

Exit edit mode without saving the value. To save the value,
push the button a second time.

Interrupt reading-in of the count rate.

Display code 10
If the device is not in the edit mode, code 10 is displayed if you
keep this button pushed down (2s).
Cal

Read in empty count rate
Keep the "Cal." button pushed down more than 2 s.
(only outside the edit mode).

Read in count rate
A count rate parameter, e.g. code 31, has to be in the edit
mode.
Enter
Cal
Clear
Front panel
of
evaluation unit