Berchtold Operon D760 Operator'S Manual Download Page 7

Page: 7 / 109

1.2 Definition of symbols used

Symbols are used to indicate warnings in these instructions. A signal word
that reflects the extent of the danger precedes each warning. Observe
all warning notices and exercise extreme caution to prevent accidents,
injuries and property damage.

DANGER

Indicates an immediately dangerous situation that, if not avoided,
will result in death or serious bodily injury.

WARNING

Indicates a possibly dangerous situation that, if not avoided, can
result in death or serious bodily injury.

CAUTION

Indicates a possibly dangerous situation that, if not avoided, can
result in moderate or minor injuries.

CAUTION

Indicates a possibly dangerous situation that, if not avoided, can
result in damage to property.

Warnings

Tips and recommendations

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

General

Summary of Contents for Operon D760














































































































Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands

Berchtold Operon D760, Operator'S Manual

Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands