Berchtold Operon D760 Operator'S Manual Download Page 53

Page: 53 / 109

Materials:

Use 5% aluminum acetate solution/white wine vinegar

1. Apply the 5% aluminum acetate solution/white wine vinegar to a lint-

free cloth.

2. Remove the spots with the cloth.
3. Rinse the surface with clean water.
4. Dry with a soft, lint-free cloth.

NOTICE

Visible impurities, such as blood and gross soiling/bioburden,
must always be thoroughly cleaned off prior to disinfection.

Materials:

Quaternary ammonium compounds

NOTICE

Material damage from disinfectants such as lodophor!

Using disinfectants such as lodophor causes spotting on the OR
table.

1. Use only quaternary ammonium compounds for disinfec-

tion.

NOTICE

Material damage from sodium hydroxide and sodium hypochlor‐
ite.

The use of sodium hydroxide (lye) and sodium hypochlorite
(bleach) on coated aluminum parts can lead to surface changes
and affect the service life of the product.

1. Do not use sodium hydroxide or sodium hypochlorite sol-

utions.

Removing spots (e.g.,
blood/plaster)

Disinfection

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

Operation

Summary of Contents for Operon D760














































































































Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands

Berchtold Operon D760, Operator'S Manual

Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands