Berchtold Operon D760 Operator'S Manual Download Page 52

Page: 52 / 109

WARNING

Risk of injury due to corrosion or deformed components through
incorrect cleaning or use of incorrect cleaning agents!

Using the wrong cleaning agents or cleaning the OR table incor‐
rectly can cause injury from corrosion and deformed components.

1. You must comply with the following cleaning instructions.
2. Do not use abrasive, corrosive or chlorinated cleaning

agents.

3. Use only mild, non-chlorinated, and non-corrosive clean-

ing agents.

4. Do not use any sharp, pointed or abrasive objects for

cleaning.

5. Use only soft brushes for cleaning.
6. Be sure to comply with all OR regulations during clean-

ing procedures.

NOTICE

The operator must observe the facility's infection control program
requirements. The product warranty applies to undamaged surfa‐
ces only. Non-compliance with cleaning instructions terminates
any claims under warranty.

Materials:

Use only mild, non-chlorinated and non-corrosive cleaning agents.

1. Apply a mild cleaning solution to a lint-free cloth.
2. Wipe the stainless steel surfaces back and forth along the metal

structure; do not use circular motions.

3. Rinse the stainless steel surfaces with clean water and wipe with a

soft, lint-free cloth.

4. Dry the stainless steel surfaces with a soft, lint-free cloth.

Cleaning stainless steel
surfaces

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

Operation

Summary of Contents for Operon D760














































































































Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands

Berchtold Operon D760, Operator'S Manual

Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands