Berchtold Operon D760 Operator'S Manual Download Page 15

Page: 15 / 109

3 Installation and initial start-up

WARNING

Risk of injury due to improper installation and initial start-up!

Improper installation and initial start-up can cause severe injury or
damage.

1. Before beginning installation, ensure there is adequate

space.

2. Use caution when handling open, sharp-edged compo-

nents.

3. Keep the installation site clean and organized. Compo-

nents and tools lying around loose or atop one another
are accidents waiting to happen.

4. Install components properly. Comply with specified tor-

ques for all fasteners.

5. Secure components from falling or over balancing.

Before initial installation, do the following:

6. Ensure that all installation work was performed accord-

ing to the information and instructions in this operating
manual and is complete.

7. Ensure that no one is in the hazard zone.

3.1 Prerequisites at the installation site

When setting up the OR table, ensure the following:

The installation site is level.

Ensure the OR table will stand securely.

Use the OR table only in rooms for medical purposes

Ensure that the OR table is easily accessible from all sides.

Lighting is sufficient.

Ventilation is sufficient.

Power supply is available.

Escape routes and life-saving equipment are freely accessible.

Improper installation and
initial start-up

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

Installation and initial start-up

Summary of Contents for Operon D760














































































































Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands

Berchtold Operon D760, Operator'S Manual

Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands