Berchtold Operon D760 Operator'S Manual Download Page 92

Page: 92 / 109

7.5 Storage

Observe the following conditions during storage:

Do not store outdoors.

Keep dry and free of dust.

Protect from sunlight.

Avoid mechanical vibrations.

Store at -14 to 122°F (-10 to 50 °C).

Relative humidity: max. 85%

Barometric pressure: 400 hPa to 1060 hPa

When storing for 3 months or longer, periodically check the general
condition of all components and the packaging. Refresh or renew
anti-corrosion protection if applicable.

NOTICE

Certain boxes may be labeled with storage instructions that are
more extensive than the requirements cited here. Follow them ac‐
cordingly.

Storing packages

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

Transport, packaging and storage

Summary of Contents for Operon D760














































































































Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands

Berchtold Operon D760, Operator'S Manual

Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands