Berchtold Operon D760 Operator'S Manual Download Page 6 | Manualshive

Page: 6 / 109

background image

1 General

This OPERON® Surgical Mobile Operating Table Operator Manual covers
models D860, D850, D830, D820, D770, D760

1.1 About this user manual

This manual provides important instructions on how to handle the device.
For safe operation, observe all safety and operating instructions. Local
accident prevention and general safety regulations also apply. Read this
manual thoroughly before beginning any work! The manual is consid-
ered part of the equipment and must be kept in the vicinity of equip-
ment at all times for reference by personnel. If the device is passed to a
third party, this manual must accompany it. The illustrations in this manual
are intended to provide a better understanding of the device; they are
not necessarily drawn to scale and may deviate slightly from the actual
version of the device.
The user should be aware of the difference between table operation for
tables with software versions prior to 8.040 All D860, D830, and D770 ta-
bles, and D850, D820, and D760 tables starting with the following S/Ns
contain software 8.040. D850 S/N 35-XXXXX-V-10841, D820 S/N 34-XXXXX-
V-10355, D760 S/N 33-XXXXX-V10254. Older tables that have been up-
graded to S/W 8.040 are identified by a label annotating S/W 8.040next
to the S/N label and on the CPU.

NOTICE

1. Illustrations in this manual, although potentially different

from your specific OPERON® Surgical Mobile Operating
Table model, are valid for all tables covered by this
manual.

NOTICE

If you have any questions regarding this manual or if it applies to
your table, please call BERCHTOLD Technical Service at
800-243-5135

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

General

6

«
...
4
5
6
7
8
...
»

Summary of Contents for Operon D760














































































































Reviews:

No comments

Related manuals for Operon D760

Brand: Tanco Pages: 72

Brand: HABYS Pages: 16

Brand: Acterna Pages: 72

Brand: Kapriol Pages: 32

Brand: FENDT Pages: 31

Brand: Tascam Pages: 27

Brand: Jay-Lor Pages: 72

Brand: MacDon Pages: 198

Brand: M-Triangel Pages: 6

Brand: 1010music Pages: 2

Brand: 1010music Pages: 4

Brand: MADRIX Pages: 12

Brand: Narcotrend Pages: 47

Brand: Jackco Pages: 6

Brand: YASKAWA Pages: 40

Brand: Zero 88 Pages: 12

Brand: Zeiss Pages: 119

Brand: Zehnder Rittling Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands