Berchtold Operon D760 Operator'S Manual Download Page 62

Page: 62 / 109

NOTICE

Material damage due to long application times of alcohol contain‐
ing disinfectant!

If alcohol-containing disinfectant are left on too long, the Velcro
fasteners can become damaged and flammable air-gas mixtures
may from.

1. Use a mild disinfectant.
2. Alcohol-containing disinfectants should be allowed to sit

for a short time only.

Materials:

Detergent

1. Close the restraint straps
2. Wash at a max. temperature of 140°F (60°C), do not spin, do not dry

clean.

NOTICE

Closing the restraint straps protects both the straps and other
items from damage during the laundering process.

Washing the restraint straps

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

Operation

Summary of Contents for Operon D760














































































































Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands

Berchtold Operon D760, Operator'S Manual

Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands