Berchtold Operon D760 Operator'S Manual Download Page 90

Page: 90 / 109

7 Transport, packaging and storage

7.1 Transport safety instructions

NOTICE

Material damage due to improper transport!

Improper transport can result in components falling or
over balancing. The damage can be expensive.

1. Exercise due care when unloading shipping containers

upon delivery and during internal transfer. Be sure to
comply with the symbols and instructions on the pack-
aging.

2. Use designated attachment points only.
3. Packaging should not be removed until just prior to as-

sembly.

7.2 Transport inspection

Check the delivery immediately for completeness and any damage dur-
ing transport.
For obvious transport damage, do the following:

Do not accept the delivery, or accept it only conditionally.

Note the extent of the damage on the shipping documents or on the
transporter's delivery note.

File a complaint by calling BERCHTOLD Technical Services at
800-243-5135, Option 2.

NOTICE

Report every defect as soon as it is discovered. Claims for dam‐
ages may be submitted only within the applicable claim period.

Improper transport

Operator Manual Surgical Mobile Operating Table Models D860, D850, D 830, D820, D770, D760

Transport, packaging and storage

Summary of Contents for Operon D760














































































































Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands

Berchtold Operon D760, Operator'S Manual

Search results

Summary of Contents for Operon D760

Reviews:

Related manuals for Operon D760

Brands by name

Popular brands