Belimo TRANE TAF Series, Technical Documentation Manual

Page: 124 / 168

124
I20683 - Subject to change.
ZG-AF US Crankarm Adaptor Kit
For TAF and TNF Series Actuators
Application
The ZG-AF US Crankarm Adaptor Kit is designed for
applications where the actuator cannot be mounted directly
to the damper shaft.
The ZG-AF US Crankarm Adaptor Kit includes:
1 KH-AF Crankarm with Retaining Ring
2 Standoff Brackets
4 Mounting Feet
2 Bolts with Nuts
2 Self-Tapping Screws
2 KG8 Ball Joints Instructions
The following Universal Mounting Brackets are needed to fully
convert to crankarm operation:
ZG-100
ZG-101
The ZG-100 and ZG-101 Universal Mounting Brackets are
designed for applications where the actuator cannot be
mounted directly to the shaft, and no proper mounting surface
is available. It may be used for outside or inside the duct
mounting, fastened to the ductwork or directly to the damper
assembly. It may also be used to mount to other surfaces
rather than the duct.
The ZG-100 and ZG-101 are provided with pre-punched hole
patterns for the TAM, TGM, TNF, and TAF series actuators.
The ZG-100 hole pattern layout allows mounting these
actuators in three different, mounting orientations. The
ZG-101 hole pattern layout allows mounting these actuators in
two different, mounting orientations. The ZG-100 and ZG-101
may also be field drilled for special or more exact mounting
of linkage components.
For technical data and dimensions on ZG-100 and ZG-101
Universal Mounting Brackets, see page 300.
OTHER CRANKARM ADAPTOR KITS AND UNIVERSAL
MOUNTING BRACKETS
MOUNTING ACTUATOR
KIT BRACKET* USED WITH
ZG-AF108 ZG-108 Included) TNF, TAF
ZG-AF US ZG-100, ZG-101 TNF, TAF
ZG-LF112 ZG-112 (Included) TLF
ZG-LF2 NA TLF
ZG-LFC114 NA TLF
ZG-TF112 ZG-112 (Included) TTF
ZG-TF2 NA TTF
ZG-GM2 ZG-101, ZG-101, TGM
ZG-103, ZG-104
ZG-NMA ZG-101, ZG-101, TNM, TAM
ZG-103, ZG-104
NA ZG-106 TNF, TAF
NA ZG-107 TNF, TAF
*Unless otherwise noted, mounting brackets are not included
in crankarm adaptor kits.
ZG-AF US