Belimo TRANE TAF Series, Technical Documentation Manual

Page: 120 / 168

120
I20683 - Subject to change.
OTHER CRANKARM ADAPTOR KITS AND UNIVERSAL
MOUNTING BRACKETS
KIT MOUNTING ACTUATOR
BRACKET* USED WITH
ZG-AF108 ZG-108 (Included) TNF, TAF
ZG-AF US ZG-100, ZG-101 TNF, TAF
ZG-LF112 ZG-112 (Included) TLF
ZG-LF2 NA TLF
ZG-LFC114 NA TLF
ZG-TF112 ZG-112 (Included) TTF
ZG-TF2 NA TTF
ZG-GMA ZG-101, ZG-101, TGM
ZG-103, ZG-104
ZG-NMA ZG-101, ZG-101, TNM, TAM
ZG-103, ZG-104
NA ZG-106 TNF, TAF
NA ZG-107 TNF, TAF
*Unless otherwise noted, mounting brackets are not included
in crankarm adaptor kits.
ZG-102 Multiple Actuator Mounting Bracket
For TGM and TAF Series Actuators
Application
The ZG-102 multiple actuator mounting bracket is designed
for cases where it is necessary to mount two actuators to
one shaft to provide extra torque.
The dual mounting bracket is typically used with the TAF
and TGM series actuators. This is due to the fact that each
of these series are the highest torque range available.
Figures A and B demonstrates two different mounting
configurations using the ZG-102 mounting bracket.
Accessory
AV10 - 25 Universal shaft extension.
Hole set B
Hole set A
7"
[77.8]
3-3/8"
[85.7]
5 3/4"
[146.1]
1-15/16"
[49]
Material: 12 GA
Galvanized
Weight: 1.8 lbs.
Note: The major
advantage with this
method is it requires
less mounting area.
The manual override,
if available, cannot
be used in this
configuration.
Note: The major advantages
are that a shorter shaft is
required and a lower profile
is achieved.
Figure A
Figure B
Dimensions
[All numbers in brackets are in millimeters.]