BELGACOM Belgafax 700, User Manual

Page: 49 / 71

Chapter 7
44
1 Turn on the unit, then open the print-carriage access door by lifting the
handle until the door locks into place.
The print carriage moves to the center of the unit.
2 After the carriage stops moving, lift the latch to release the print cartridge,
then pull it toward you out of its slot.
3
If you are removing the black print cartridge in order to install the photo
print cartridge (#58), store it in the print cartridge protector.
4
Remove the new print cartridge from its packaging and, being careful to
touch only the black plastic, gently remove the plastic tape (using the pink
pull tab) to uncover the ink nozzles.
Caution! Do not touch the copper contacts or ink nozzles.
Be sure not to re-tape print cartridges as damage to the print head may
occur.
5 Push the new print cartridge into the appropriate slot.
The tri-color print cartridge goes on the left and the black or photo print
cartridge goes on the right.
latches
Titan.book Page 44 Wednesday, February 26, 2003 12:30 PM