BELGACOM Belgafax 700, User Manual

Page: 14 / 71

3
9
Load Originals and Load Paper
You can copy from originals loaded on the glass or in the automatic document
feeder. You can also print and copy onto a variety of paper types, weights, sizes,
and transparency films. It is important, however, that you choose the right paper
and make sure that it is loaded correctly and not damaged.
Load originals
Your unit provides two ways to load originals.
• Load originals on the glass
• Load originals in the automatic document feeder
Load originals on the glass
You can copy, fax, or scan any original by placing it on the glass.
Note: Many of the Special Features options, such as Image Size or Poster ,
will not work correctly if the glass and lid backing are not clean. For more
information, see
Clean the glass and Clean the lid backing on page 41.
1 Lift the lid and place the original face down on the glass in the front-right
corner with the sides of the originals touching the right and bottom edges.
It is important to use the front-right corner when using the copy, fax, or scan
feature.
Tip: If you are copying from a transparency (that is, your original
is printed on transparency film), place a blank piece of paper on
top of the transparency.
2 Close the lid by pushing down on the lever below the front panel.
Top edge of
original
Titan.book Page 9 Wednesday, February 26, 2003 12:30 PM