BELGACOM Belgafax 700, User Manual

Page: 43 / 71

Chapter 6
38
Set the fax header
Follow these steps to enter your name and fax number from the front panel.
1 Press Menu.
2
Press
5
, then press
2
.
This selects the
Basic Fax Setup
menu, then selects the
Fax Header
option.
3 When Your Name appears, enter your name using the keypad as
described in the next section, Enter text on page 38.
4 Press Enter .
5 When you are prompted, use the keypad to enter your fax number.
6 After you finish entering your fax number, press Enter .
Enter text
The following list provides tips for entering text using the front-panel keypad.
• Press the keypad numbers that correspond to the letters of a name.
• Press a button multiple times to see a letter first in lowercase and then in
uppercase. The first letter of a word is set to uppercase automatically.
• After the correct letter appears, press , then press the number that
corresponds to the next letter in the name. Again, press multiple times until
the correct letter appears.
• The cursor automatically advances to the right 1.5 seconds after the last
button is pressed.
• To insert a space, press Space (#) .
• To enter a symbol, such as @, press
Symbols (*)
repeatedly to scroll through
the list of available symbols, which are: *, -, &, ., / (), ‘, =, #, @, _, and !.
• If you make a mistake, press to clear it, then make the correct entry.
• After you finish entering text, press
Enter
to store your entries.
These letters correspond to this number, and so on.
ABC
2
To get this character:
Press 5 this many times:
JKL
5
j
1 k
2 l
3 J
4 K
5 L
6 5
7
Titan.book Page 38 Wednesday, February 26, 2003 12:30 PM