BELGACOM Belgafax 700, User Manual

Page: 15 / 71

Chapter 3
10
Load originals in the automatic document feeder
Your device has an automatic document feeder (ADF), which you can use
to load up to 35 originals of the following paper type:
• Plain paper
16 lb (60 gsm) to 24 lb (90 gsm) long-grain paper only
Single sheet only:
• Real Estate paper
To scan, copy, or fax from the ADF
1 Place all originals in the ADF print side up.
2
Adjust the paper-width guide to fit the size of your original.
A message appears on the display indicating that the originals are
loaded.
Load paper
The following is the basic procedure for loading blank paper. There are specific
considerations for loading certain types of paper, transparency film, and
envelopes. After you review this procedure, see
Tips for loading other types of
paper on page 13 and Load envelopes on page 11.
For best results, adjust the paper settings each time you change paper types or
paper sizes. For more information, see
Set the paper type
on page 14.
To load the paper tray
1 Remove (pull out) the output tray and slide the paper-width and paper-
length guides to their outermost positions.
Titan.book Page 10 Wednesday, February 26, 2003 12:30 PM