Section E. Unitizing Belarus-510/512 — Operating manual
59
Tires
IMPORTANT!
1. Never exceed tire pressures as recommended by the manufacturer.
2. Don’t weld the disk or perform any other repairs with a tire inflated. To unmount
and repair tires, contact a shop with specially trained personnel.
Tires used on 510/512 tractors
Tires
When FDA 72 is installed
When front axle is installed
Main
front
11.2 – 20;
9.00 – 20;
(9.00R20)
rear
15.5R38
15.5R38
IMPORTANT! For tractors with FDA, correctly select a combination of front and
rear tires.
Use of a correct combination of front and rear tires ensures maximum per-
formance of the tractor, increases the service life of the tires and decreases wear of the
power gear parts. Use of worn and new tires, or tires of different diameters or rolling ra-
dius can result in misobservance of requirements to kinematic compliance and exces-
sive wear of the tire.
For normal operation of the tractor, set the tire pressure as indicated in the table below. Set
the pressure in “cold” tires. When performing jobs that require high tractive forces, set the
pressure as for the speed of 30 km/h.
For transportation jobs on roads with hard surfaces, increase the pressure by 30 MPa.
When working with a front lift, set the maximum pressure specified for front tires.
