Section D. Operating instructions Belarus – 510/512 Operating manual
44
Stopping tractor
To stop the tractor:
• reduce the engine crankshaft speed;
• use the service brakes to stop the
tractor;
• step on the clutch pedal;
• shift the gear shifter lever to the neu-
tral position;
• engage the parking brake.
Steering
IMPORTANT!
The
tractors
are
equipped with the hydrostatic steering
booster. If the engine is stopped, the
pump does not supply the system and
it starts automatically operating in the
manual mode where turning the tractor
requires a greater force to be applied
to the steering wheel.
IMPORTANT!
To stop the tractor in
case of emergency, step on the clutch
pedal and twinned service brakes pe-
dal at the same time.
Shutting down engine
IMPORTANT!
Prior to shutting down
the engine, lower the implement onto
the ground and let the engine operate
at 1,000 rpm for 1 to 2 min. This will
decrease the engine temperature.
To shut down the engine, proceed as fol-
lows:
• set manual fuel feed lever to minimal
feed position (back to the stop);
• disengage the PTO and shift all dis-
tributor levers to their neutral posi-
tions;
• lower the implement onto the ground;
• pull engine shut-off lever cord handle to
fully stop the engine;
• turn off the ground switch to avoid storage
battery run-down.
Hydraulic system
The hydraulic system controlling the three-
point rear attachment ensures system op-
eration in the height control mode.
Height control
When working with attached tillers, they
must have a supporting wheel.
