Section G. Maintenance Belarus– 510/512 Operating manual
104
Operation 41. Engine oil pre-filter
• Loosen four clamps of connector
sleeves and remove the filter from the
oil line located in front of the engine oil
radiator.
IMPORTANT!
Note the filter orientation
in the oil line. Arbitrary installation of
the filter is not allowed.
Wash the filter in diesel fuel and blow
it with compressed air in the direction
of the arrow on the filter body.
Install the filter to place, paying atten-
tion to its correct orientation in the oil
line.
Tighten the sleeve clamps.
Operation 42. Washing the engine breather
• Unscrew the bolts (1) and remove the breather
casing (2).
• Remove the breather from the casing, wash it
in diesel fuel and blow it with compressed air.
Pour some motor oil into the breather filter and
letting the oil to flow down, fit it back.
Operation 43. Adjustment of steering booster
In the steering booster, the following items are
adjusted: warm to sector mesh, sector to rack
mesh, tightening of worm nut, pivoting shaft axial
stroke, safety valve, as well as differential lock
valve.
1 – spherical nut; 2 — washer; 3 — slider;
4 – mounting washers; 5 — bolts.
