Section E. Unitizing Belarus-510/512 — Operating manual
51
Inner rods (2)
Used also to limit side oscillation of ma-
chines both in the working and in transpor-
tation positions.
NOTE:
The telescopic rods are installed only
outside.
Partial lock (for plowing)
Adjust at the machine working position as
follows:
• screw the adjustment bolts (1) into the
brackets up to stop;
• lift the machine so that its tools take off the
ground;
• adjust the right bracket length to the de-
sired plowing depth (when working with
a plow);
• by rotating the braces (2), adjust the length
of the limit chains ensuring machine
movement in the horizontal plane by 125
mm to each side from the middle position
or according to the machine operating
manual.
When installing the machine to the trans-
portation position, screw out the bolts (1)
for its partial lock. Oscillation of the ma-
chine to the both sides to 20 mm max. is
allowed.
A full lock (for cultivation, sowing etc.) is
set as follows:
• fully screw in the adjustment bolts (1);
• shorten the rods (2) to the maximum ex-
tent possible.
IMPORTANT!
When changing the right
brace length, always re-adjust the rods.
