Section E. Unitizing Belarus-510/512 — Operating manual
52
Outer chain binders (2)
Partial lock
Ensure horizontal movement of the ma-
chine in the working position by connect-
ing the limit chains to the lower holes of
the brackets (1) and adjusting the chain
length using the rods (2), to obtain oscilla-
tion of the tool to each side by 125 mm
min. or according to the machine operating
manual.
When working with plows, adjust the right
bracket length to the desired plowing depth.
ATTENTION!
Always maintain the oscil-
lation of the machine of 125 mm min. to
avoid break of chains when the machine
is lifted to the transportation position.
When installing the machine to the trans-
portation position, tension the chains with
the rods (2). Oscillation of the machine of
20 mm max. to the both sides is allowed.
Full lock
To fully lock the machine in the transporta-
tion position, attach the limit chains (2) to
the hole of the bracket (1) second from the
bottom and shorten the chains (2) to the
maximum extent possible.
In the transportation position, lock is pro-
vided automatically.
