Section E. Unitizing Belarus-510/512 — Operating manual
58
Use of rear attachment with a tow gear
installed on the tractor is strictly for-
bidden!
The trailers work at speeds determined
by road conditions. With 2
ПТС
-4-887
А
with 20 and 45 m³ bodies, operating at
speeds up to 15 km/h is allowed, as they
have lower stability. Avoid making sharp
turns for such trailers and 1
РМГ
-4
spreaders to avoid damages to rear
fenders.
The hinge of trailers (2
ПТС
-4-785
А
etc.)
must be fixed to prevent its rotation in or-
der to avoid its pinching.
During operation, the fork of the
ТСУ
-1
Ж
haul-and-draw coupler must be fastened
on the trailer cross-member with two
pins. Working with the fork fastened with
one pin is forbidden.
Before work, make sure that the pins and
pivot of the hitch fork are securely splint-
ed. Connect all signaling devices of the
trailers (stop signal, turn indicators, plate
illumination) using the socket installed on
the tractor.
Use of tractor auxiliary equipment
As auxiliary equipment on the tractor, the
drive pulley, additional counterweights to
the front axle, the SA-1 automatic cou-
pler, the spacer for mounting coupled
rear wheels and other equipment can be
installed.
The drive pulley is installed on the cover
of the rear PTO reduction gear and is
driven from the PTO splined shank. To
avoid deformation of the PTO shank,
necessarily install the housing on four
studs with centering the flange in the
PTO cover. Engage and disengage the
pulley using the PTO control lever.
Additional counterweights of a total
weight of 220 kg are installed on a spe-
cial bracket fastened to the tractor front
bar.
